Integral waterproofing cement with hydrophobic admixtures factory-blended, providing water-resistant concrete and mortar for basement tanking, water features, retaining walls, and wet room applications.

Carbon-capture enhanced cement incorporating mineralised CO₂ as a permanent binder component, achieving net-zero embodied carbon with 52.5N strength class performance.

Low-temperature antifreeze cement with incorporated frost-protection admixtures, allowing concrete placement and curing at ambient temperatures down to -5°C without external heating measures.

Low-carbon cement with 50% clinker replacement using certified supplementary cementitious materials, delivering equivalent structural performance with approximately 45% lower embodied CO₂ than standard OPC.

Pre-dosed fibre-reinforced cement with 0.6kg/m³ polypropylene fibre inclusion, providing plastic shrinkage crack control, impact resistance, and enhanced post-crack toughness for industrial floors.

High-strength structural cement with 56MPa 28-day strength, low water demand, and enhanced durability for reinforced concrete foundations, pile caps, and below-ground structural elements.

Polymer-modified cement-based tile grout available in 20 standard colors, providing flexible, stain-resistant joints from 1mm to 12mm width for wall and floor tile installations.

Pre-blended masonry cement with incorporated lime and air-entraining agent, providing excellent workability, adhesion, and durability for brick, block, and stone laying mortars.

Low-heat blended cement combining Portland clinker with 30% pulverised fly ash (PFA), providing reduced heat of hydration, improved long-term strength, and enhanced sulphate resistance.

Specialist pool shell cement with chlorine-resistance, low water absorption, and smooth finish characteristics for cast and shotcrete swimming pool construction and refurbishment.

High-early-strength precast cement achieving 25 MPa at 18 hours, with consistent particle size for smooth release quality and efficient steam curing compatibility.

Pre-blended render cement with graded aggregate and polymer modifier for crack-resistant, weather-tight external render coats on brick, block, and concrete substrates.

Pumpable floor screed cement with fibre reinforcement and polymer modification, providing crack-free, flat screeds at 40-75mm thickness for domestic and commercial floor applications.

Dry-process shotcrete cement with accelerator compatibility and optimized fineness for tunnel linings, slope stabilization, and structural spray concrete applications.

Low C3A sulphate-resistant Portland cement conforming to EN 197-1 SR requirements, providing protection against sulphate attack in Class XA1 to XA3 ground and groundwater conditions.

High-alumina refractory cement withstanding temperatures up to 1350°C, for use in fireplaces, kilns, furnace linings, pizza ovens, and all high-temperature masonry applications.

C2TE classified large-format tile adhesive with extended open time, non-slip additive, and polymer modification for wall and floor tiles up to 600x600mm on all standard substrates.