Specialist pool shell cement with chlorine-resistance, low water absorption, and smooth finish characteristics for cast and shotcrete swimming pool construction and refurbishment.

Specialist piling and bored pile cement with optimized C3S/C2S ratio for cohesive ground conditions, elevated bleed water resistance, and compatibility with all standard stabilizing admixtures.

Carbon-capture enhanced cement incorporating mineralised CO₂ as a permanent binder component, achieving net-zero embodied carbon with 52.5N strength class performance.

Water-based cement and concrete dust suppressant forming a temporary surface crust on cement products during storage, loading, and transport — reducing respirable dust exposure on site.

High-early-strength precast cement achieving 25 MPa at 18 hours, with consistent particle size for smooth release quality and efficient steam curing compatibility.

High-performance chemical-resistant cement based on potassium silicate chemistry, providing resistance to mineral acids, organic acids, and aggressive solvents for industrial flooring and tank lining.

Pre-dosed fibre-reinforced cement with 0.6kg/m³ polypropylene fibre inclusion, providing plastic shrinkage crack control, impact resistance, and enhanced post-crack toughness for industrial floors.

Dry-process shotcrete cement with accelerator compatibility and optimized fineness for tunnel linings, slope stabilization, and structural spray concrete applications.

Controlled low-strength cement (CLSM) for underpinning, trench reinstatement, and service void filling — flowable, excavatable, and providing long-term sub-base stability.

Polymer-modified cement paving joint compound for block paving, stone, and large-format patio slabs — self-compacting, weed-resistant, and frost-proof for long-lasting jointing.

Flowable non-shrink cementitious grout for column and baseplate grouting, machine bedding, void filling, and anchor bolt setting — achieving 50 MPa at 28 days with guaranteed zero shrinkage.

Polymer and air-entrained external finish render with built-in frost resistance, hydrophobic surface treatment, and through-color options for durable exterior wall finishing.

Cementitious structural repair mortar achieving 45 MPa at 28 days, with shrinkage compensation, high bond strength, and polymer modification for concrete repair depths of 10–80mm.

High-strength structural cement with 56MPa 28-day strength, low water demand, and enhanced durability for reinforced concrete foundations, pile caps, and below-ground structural elements.

C2TE classified large-format tile adhesive with extended open time, non-slip additive, and polymer modification for wall and floor tiles up to 600x600mm on all standard substrates.

Polymer-modified cement-based tile grout available in 20 standard colors, providing flexible, stain-resistant joints from 1mm to 12mm width for wall and floor tile installations.

Pumpable floor screed cement with fibre reinforcement and polymer modification, providing crack-free, flat screeds at 40-75mm thickness for domestic and commercial floor applications.

Pre-blended render cement with graded aggregate and polymer modifier for crack-resistant, weather-tight external render coats on brick, block, and concrete substrates.

Pre-blended masonry cement with incorporated lime and air-entraining agent, providing excellent workability, adhesion, and durability for brick, block, and stone laying mortars.

Low-carbon cement with 50% clinker replacement using certified supplementary cementitious materials, delivering equivalent structural performance with approximately 45% lower embodied CO₂ than standard OPC.